Typical System Components

automist auto mist, hago, alpha, nylon tubing

Analog Timers

These timers are built to offer easy setting of spray cycles and durations.

A wide and varied combination of settings is possible for providing optimum

control in your application.

automist digital timer

Digital Timers

These timers are one of the easiest on the market to program. many digital timers offer features

that are confusing, difficult to program or just not needed.

Automist has added only the common features to the timer remote control like manual mode

and "skip a cycle" to eliminate confusion.

automist auto mist, hago, alpha, nylon tubing

Nickel plated fittings and Hago style nozzles offer superior protection from corrosion.
Simple, quick and easy are a few words that describe our nozzle assemblies and fittings.
Interchangeable fittings can be used on either of our nozzles - straight or 45 degree.

Hago style nozzles offer superior performance and reliability.

Each nozzle contains a check valve, seen here, to prevent dripping

when the system power up or shuts down.

This style tee nozzle assemble is the best choice for the majority of installations.

The tee nozzle assembly is excellent for livestock applications, one tee nozzle per 12' x 12' stall or area.

This style nozzle works great on fence lines in back yards or along a deck railing for

a residential application too.

Elbow nozzle assemblies are used at the end of a tubing run.
This nozzle is used on the end so that an air bleeder valve is not necessary.

mosquito control, automatic insect control system, fly control,

Straight nozzle assemblies are used in areas where a loop of tubing may not be needed or available.
Branching off of a main feed line to supply a straight nozzle offers the flexibility to reach areas that might be out of the way.

The fitting release tool makes changing fittings and nozzles in your system a snap.
This tool is used to compress the colored plastic collar on the tee or elbow body to release the tubing.

Brass Mini Nozzle for Residential applications.

Mini Tee Nozzle for Residential installations.

45 degree nozzle on copper riser. Used in backyard applications where

riser and nozzle can be hidden amongst shrubbery.

Union Tees are used to add additional lines from the main line.

They are also a main component of Tee Nozzles.

Union Elbows are used to make a neat, tight 90 degree turn with the nylon tube.

They are also a main component of Elbow Nozzles.

A Union is used to join lengths of tube together.

Unions are useful when splicing in new sections to tube that may have become damaged

or when a system is being extended to cover additional areas.

A Line Shutoff Valve is used to close off a line that may be used only occasionally.

All nozzles beyond this valve can be turned off when not required.

The Intake Line Filter or Suction Filter is a vital part of the system.

It filters impurities from the fluid in the drum before it enters the pump.

This filter should be changed once a season for optimum pump and system performance.

Float switch or liquid level over ride.

This is a vital part of the system that provides protection to the pump by sensing when the liquid is low.

This control will then disable the pump to prevent damage.

Once the system is filled the control senses it and enables the pump to be operable once again.

(Intake line assembly detail is shown depicting the suction filter, float switch and weight.)

Nylon tubing colors in Black, Clear, Tan and White.